After You Replace The Lcm; Replacing The Compact Flash Card In The Lcm - Spectra Logic T-Series Spectra T950 Release Note

Assisted Self Maintenance Guide Updates

After You Replace the LCM

After you replace an LCM and the library restarts, restore the partition
definitions and library configuration settings using one of the following
methods.
Do not install the compact flash card from the LCM you replaced unless directed to
Caution
do so by SpectraGuard Support. Installing a corrupted compact flash card can
cause the new LCM to fail.

Replacing the Compact Flash Card in the LCM

Do not install the compact flash card from the LCM you replaced unless directed to
Caution
do so by SpectraGuard Support. Installing a corrupted compact flash card can
cause the new LCM to fail.
1. Power off the library.
204
Release Notes
If SpectraGuard Support directs you to do so, remove the card from the
LCM you replaced and install it in the new LCM compact flash slot (see
Replacing the Compact Flash Card in the LCM on page
Use an auto-save configuration file you previously saved to a USB key
to restore the library configuration and MLM database (see
From an Auto-Save Configuration File on page
If you do not have an auto-save configuration file available, see
Restoring the Library Configuration Using a Saved Configuration File
on page 164 for information about using the advanced utilities to
restore a previously saved library configuration file. See
MLM Database on page 165
database using a previously saved backup. If necessary, update the
configuration to the most current settings after the restore is complete.
If you do not have any backups of the library configuration, re-enter all
of the configuration settings using the information you recorded in
Before You Begin on page
detailed instructions.
Import the encryption key as described in
page 139.
for information about restoring the MLM
203). Refer to the Spectra T950 User Guide for
Restoring Encrypted Data on
204).
Restoring
160.
Restoring the
90940002