Spectra Logic T-Series Spectra T50e Hardware Replacement Manual page 9

General Library Information
Select Configuration -> Settings -> to gather the general library settings.
Users and Passwords
1. Select Security -> Edit Users -> Edit to gather the user settings.
2. Write down the user name, user type, and password of each user. Passwords are not
shown, so write down the passwords, if they are known.
Create an Auto Support Log (ASL) File
The ASL creates a backup copy of your current configuration and gathers all the logs
from the library. You can email the ASL file to SpectraGuard Support and they can
provide you with the detailed information to reconfigure your library as a last resort.
The only information not contained in this log file are the BlueScale logon passwords,
and the Encryption keys. The Encryption keys must be backed up or saved separately.
If you do not have an AutoSupport Log Profile configured, creating one at this time
may not work if the LCM is malfunctioning. If this is the case, make sure you record all
the information in the previous sections to restore your library configuration after
replacing the LCM.
Able to Create ASL
If you are able to create a log, follow these steps:
Before You Begin
9