Spectra Logic T-Series Spectra T50e Hardware Replacement Manual page 17

4. Scroll through the options and select the one that is most suitable for your situation:
Option
Restore Configuration
from Checkpoint
Upload Backup
a
Configuration
Restore Library
Configuration from
a b
Uploaded File
a. These options are only available when you access the library from a web browser using the RLC.
b. Please note that this option may not be possible until you configure your library network settings.
5. Press Select. The screen refreshes to show the details for the selected utility.
6. Select Run to execute the utility. After a brief delay, the Utility Results screen
appears, showing that the configuration file was uploaded and/or the configuration
restored.
Note:
Running any one of these utilities requires the library to reboot.
Restoring the Configuration via Gathered Information
If there is no stored configuration, or if the restoration of the configuration from the
USB key fails, follow the procedures outlined in the Spectra T50e Library User Guide to
build new partitions and to program the necessary user settings. Use the information
that you gathered in You do not have a Valid Backup Library Configuration on pages
page 4 to page 12.
Use this option to...
Restore the configuration from the last firmware update.
Upload a configuration file that you previously saved on a
computer to a temporary location in the library memory.
Note: If you used this option, you must then run the
Library Configuration from Backup Uploaded File
restore the library configuration.
Complete the restore process started by
Configuration
by uploading a a saved configuration file from
a computer using the RLC.
Note: This option is used in conjunction with
Configuration
, which must be completed first.
Restoring the Library Configuration
Press this button
to begin the upload
process.
Restore
utility to
Upload Backup
Upload Backup
17