Spectra Logic T-Series Spectra T50e Hardware Replacement Manual page 19

2. Fold the bag snugly around the component and tape it closed (see Figure 3).
3. Place the bottom air cushion, plastic side up, in the shipping box.
4. Place the wrapped component in the center of the bottom air cushion (see
Figure 4).
Note:
The air cushions for the power supply are slightly different in
appearance, but function the same way.
5. Place the top air cushion, plastic side down, over the component (see Figure 5).
When properly installed, the two air cushions suspend the component securely in
the center of the box. These figures show a generic component for reference.
Figure 6 Place the component on the
bottom air cushion.
6. Tape the box securely shut.
7. Proceed to Shipping RMA Returns below for shipping instructions.
Figure 5 Wrap the component in an anti-static
bag (generic component shown).
Packaging a Component for Shipment
Figure 7 Place the top air cushion over
the component.
19