Table of Contents
Advertisement
14
Maintenance
Warning!
Injuries due to the cutting blades!
Always switch off the robot lawnmower
at the [ON/OFF key] before starting
maintenance and repair work.
Always wear work ing gloves when
carr ying out maintenance and care
jobs on the blade system.
Disconnect the transformer of the base
station from the mains.
Important!
Damage to the electrical/electronic system
by incorrect cleaning!
Do not clean the robot lawnmower with
a high-pressure cleaner or under running
water. Water penetration can cause
irreparable damage to the switch, battery
and circuit boards.
Entrust all repairs (apart from replacement of the blades) to
specialist workshops approved by the manufacturer.
The user is under obligation:
1. To bring the robot mower to the workshop after
between 100 and 200 hours operation, for:
• Check on tightness of bolts
• General check on programming and detection of
possible errors
2. To bring the robot mower to the workshop after 500
and 2500 hours operation, for:
• General check on tightness of bolts and mechanical
parts
• Check on error statistics
• Check on battery status
• Check on wheel bearings
• Inspection of blade and check for possible damage
• General inspection and cleaning
Operations to be carried out periodically by the user
•
Once a week, clean the robot lawnmower thoroughly
with a hand brush or a cloth, and use care spray if
necessary. Contamination can impair the function of
the machine if not removed.
•
Once a week, check the cutting blades for damage.
14.1
Check the rollers can move freely
1 Once a week, thoroughly clean the area around the rollers
(1) with a hand brush or cloth.
2 Check the rollers (1) can move and steer freely. If the rollers
(1) do not move freely, they must be freed up or renewed.
14.2
Checking/cleaning contacts
Check the contact surfaces (1) on the robot lawnmower for
contamination.
Clean the contact surfaces (1) on the robot lawnmower
with a cloth if necessary.
Charring on the contact surfaces indicates a poor charging
contact.
Bend the springs on the base station outwards.
1
1
71
Advertisement
Table of Contents
