Setting The Language; Further Setting Possibilities; Activate Or Deactivate The Button Tones - Efco SIRIUS 700 Operators Instruction Book

1. Press the [up arrow key] briefl y once. A [0] fl ashes at the
fi rst place in the display, or press the [arrow key] (2) once
briefl y. A [9] fl ashes at the fi rst place in the display.
2. Either use the [down arrow key] to count down from [9] or
use the [arrow key] to count up until the required digit is
displayed.
3. Confi rm with the [multifunction key right].
4. Enter the next required digits in the same way until the
date has been fully set.
5. Confi rm with the [multifunction key right].
Exit setup mode by pressing the [Menu key] twice.
10.3

Setting the language

Before programming, it is necessary to perform the start
procedure (see page 64).
1. Use the [up arrow key] or the [down arrow key] to select
the [Settings] menu item.
2. Call up the required menu, [Language].
3. Confi rm with the [multifunction key right].
Note!
The corresponding language only needs to be selected here
during the initial start-up.
1. Use the [arrow keys] to select the required language.
2. Confi rm with the [multifunction key].
3. After confi rming, the LCD display shows [Enter registration
PIN].
68
10.4

Further setting possibilities

Note!
All other setting possibilities are always called up in the
same way.
After switching on, it is possible to call up the
corresponding program menu with the [menu key].
1. Select the [Settings] menu in the main menu.
10.5

Activate or deactivate the button tones

Before programming, it is necessary to perform the start
procedure, see page 64 .
1. Use the [up arrow key] or the [down arrow key] to select
the [Settings] menu item.
2. Call up the required menu, [Button tones].
3. Confi rm with the [multifunction key right].
4 Activate or deactivate the button tones with the
[multifunction key right].
Exit setup mode by pressing the [Menu key] twice.