Table of Contents
Advertisement
4.3
Control panel
1
HOME key
2
LCD display
3
STOP key
4
Up arrow key
5
Down arrow key
Function of the keys
The [HOME key] (1) cancels the current mowing
procedure. The robot lawnmower returns to the base
station and will restart with the first programmed
operation for the next day.
The [LCD display] (2) displays the current status or the
selected menu.
Pressing the [STOP key] (3) stops the robot lawnmower
and the cutting blade within 2 seconds.
The [up arrow key] (4) and [down arrow key] (5) are used
for navigating in the menu and for changing values.
Press the [START/PAUSE key] (6) to start the robot
lawnmower or interrupt operation. If you press START/
PAUSE during programmed operation the robot will
restart automatically after approximately 2 minutes.
Use the [multifunction keys right or left] (7) or (8) to
confi rm or revoke commands, for example (selecting a
menu command).
The [ON/OFF key] (9) is used for switching the robot
lawnmower on or off .
Press the [menu key] (10) to open the menu.
6
START/PAUSE key
7
Multifunction key right
8
Multifunction key left
9
ON/OFF key
10
Menu key
4.4
Sensors in the robot lawnmower
Bump sensors and obstacle detection
The robot lawnmower is equipped with sensors that
ensure it changes its direction of travel if it encounters
obstacles. When it encounters an obstacle, the top part of
the housing (1) is shifted slightly. This causes a sensor to
trigger a change in the direction of travel.
If the robot lawnmower is lifted up by its carry handle
during operation, a safety sensor stops the blade within 2
seconds and switches off travel mode.
Note!
The robot lawnmower does not restart automatically after
being switched off by a safety sensor. To restart, it is necessary
to acknowledge the fault by pressing the multifunction key
and rectifying the fault.
1
51
Advertisement
Table of Contents
