Table of Contents
Advertisement
9
Program menu
Note!
Description of function keys, see page 43.
Make the settings in the week program.
Look at the program info, e.g. mowing program.
Selecting the program
Before programming, it is necessary to perform the start
procedure, see page 64 .
1. Use the [up arrow key] or the [down arrow key] to select
the Programs menu item.
2. Confi rm with the [multifunction key right].
3 Select the required programs and confirm with the
[multifunction key right].
The symbol [X] shows the currently active day of the week.
9.1
Setting the week program
1 In the week program, the days of the week (2) and the
times are set when the robot lawnmower should mow
automatically.
2 In the [All days] menu item (1), the robot lawnmower
mows at the set times every day.
3 Observe the mowing result and mow as long as necessary
in order to obtain a well kept lawn.
4. Use the corresponding [arrow keys] to select the required
menu point and confi rm with the [multifunction key right]
in each case.
66
Mowing time setting in batch mode
1. Select the required menu item, [Every day], with the [arrow
keys] and confi rm with the [multifunction key right].
2. Press the [down arrow key] until [Change] is active.
1. Select the required menu item with the [arrow keys] and
confi rm with the [multifunction key right].
Explanation of symbols:
(3) [-] Mowing window deactivated.
(3) [R] Edge mowing.
The robot lawnmower mows left and right along the
boundary cable. After mowing the edges, the robot
lawnmower continues mowing the marked-out area
[M] Normal mowing
The robot lawnmower mows the entire area marked out
by the boundary cable
(4) Start time
The robot lawnmower departs from the base station at
the selected time for mowing.
(5) End time
The robot lawnmower moves back to the base station at
the selected time.
(6) [0 - 9] Fixed entry point
The robot lawnmower departs from the selected entry
point at the selected time for mowing. The start points
are set automatically and cannot be modifi ed.
[?] Automatic entry point
The start points are set automatically and cannot be
modifi ed.
Advertisement
Table of Contents
