Table of Contents
Advertisement
5.3
Laying the boundary cable
Important!
Danger of damage to the boundary cable
and impairment of function of the robot
lawnmower!
To ensure reliable function, the boundary cable
must be laid as described in the following steps:
Check the area to be mown.
Remove mole hills and windfall fruit, and
level out any holes in the area to be mown.
Lay your boundary cable around obstacles.
Lawns with grass more than 8 cm tall
c a n n o t b e m ow n u s i n g t h e ro b o t
lawnmower, and will have to be mown in
advance before the boundary cable is laid.
Once the boundary cable has been laid on
the grass, do not scarify the area of the
boundary cable any longer.
Laying options
1
2
max. 5/7 cm
The boundary cable can be laid on the lawn (1) and as
much as 5/7 cm under the turf (2). Have your dealer carry
out the laying under the turf on your behalf.
If necessary, you can also combine both methods.
54
Spare loops of cable
You should incorporate spare loops of cable at regular
intervals in order to allow the base station to be
repositioned or the mowing area to be extended even after
the mowing area has been laid out. To do this, guide the
boundary cable around a lawn peg, return to the previous
lawn peg, then continue as shown, securing with another
lawn peg.
Select the number of spare cable loops according to your
own judgement.
ca. 1 - 2 m
Advertisement
Table of Contents
