Renesas RC32012A Manual page 11

RC32012A Evaluation Kit Manual
4. The GUI window with the RC32012A block diagram will open for configurations; or if "Open Settings File" is
selected in Step 5 above, you will be prompted to browse and select an existing .tcs file and the personality file.
When the configuration file is open, all configured values will be displayed as in
5. In order to connect the board with Timing Commander (PC), click the button (red circle) at the up-right corner
of the GUI to set up the communication protocols (see
selected, click OK to close the window (see
R31UH0010EU0102 Rev.1.02
Apr 20, 2022
Figure 9. Timing Commander GUI with a Settings File Opened
Figure
Figure 10. Setting I2C for Connecting the Board with GUI
Figure 9). After I2C and one-byte addressing are
10).
Figure 9.
Page 11