RC32012A Evaluation Kit Manual
13. In the next window, press "Close" to start the EEPROM write.
14. Wait about 5mins. The EEPROM write will complete with this window below. Press "Close".
Verify the EEPROM Programming
15. Power cycle the Evaluation Board.
16. Disconnect and reconnect to the chip.
17. Read back the Firmware Version to ensure it's correct (see steps 3 and 7).
4.
Ordering Information
Part Number
RC32012A-EVK
5.
Revision History
Revision
Date
1.02
Apr 20, 2022
1.01
Oct 28, 2021
1.00
Oct 12, 2021
R31UH0010EU0102 Rev.1.02
Apr 20, 2022
Updated schematics; removed embedded files and appended files to the rear of the document.
Updated the
Schematic Diagrams
Initial release
Description
RC32012A Evaluation Kit
Description
Page 18