Table of Contents
Advertisement
4
Press the <Main Power On / Off
button> (
) on the unit to turn the
power of the unit on.
●
Power Indicator: Blue (Picture is displayed.)
●
When the power of the unit is on, the power
indicator lights up and remote control operation is
possible.
●
When the power indicator is lit, it is not necessary
to press the <Main Power On / Off button> (
on the unit. Operate the remote control so that the
power indicator turns blue (picture is displayed).
■
To turn the power ON/OFF with the remote
control
To turn the power on
●
When the <Main power switch> is ON ( ) (Power
Indicator - orange or purple), press <Standby (ON/
OFF) button> then the picture will be displayed.
●
Power Indicator: Blue (Picture is displayed.)
To turn the power off
●
When the <Main power switch> is ON ( ) (Power
Indicator - blue), press <Standby (ON/OFF) button>,
then the power will be turned off.
●
Power Indicator: Orange or purple (standby)
Note
●
During operation of the "Power management" function
(see page 65), the power indicator turns purple in the
power off state.
●
After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
●
The display turns off if the <Main power switch> is
turned OFF (
) or press the <Main Power On / Off
button> (
) on the unit while the unit is ON (picture
is displayed) or OFF (standby state).
●
When [Power LED light-up setting] is set to [Off],
the power indicator does not light up. (see page 98
[Power LED light-up setting])
■
When the Unit is turned on for the first time
Following screen will be displayed.
1
Select the language with
press <ENTER>.
OSD language
)
ENGLISH (US)
2
For vertical installation, select
[Portrait] with
<ENTER>.
Display orientation
3
When setting [Quick start], select [On]
with
and press <ENTER>.
Quick start
This function quickly turns the power on at power-on.
Power consumption is increased in standby mode.
Note
●
The [Quick start] setting cannot be used if the version
of the main microcomputer of the main software is
less than Version 2.4000.
●
Placing the cursor on [On] on the [Quick start] setting
screen displays the following message.
"Power consumption is increased in standby mode."
●
Once the items are set, the screens won't be
displayed when switching on the unit next time.
Each item can be reset in the following menus.
[OSD language] (see page 72)
[Display orientation] (see page 97)
[Quick start] (see page 60)
4
Configure the network account setting
as necessary.
Administrator account settings
Password policy
User name
Password
Save
Skip
Please set the user name and password. If not set,
could not use the Web Control function and for communication
control via a LAN (including Panasonic application software).
English (UK)
Deutsch
Français
Italiano
Español
Русский
and press
Landscape
Portrait
On
Off
dispadmin
and
37
English
Advertisement
Table of Contents
