Table of Contents
Advertisement
Note
●
This menu will be greyed out and cannot be set under
the following conditions.
[Input search] is set to the item other than [Off].
•
(see page 60)
[Setup] - [Image settings] - [No signal image
•
settings] - [Display setting] is set to [On]. (see page
70)
[Power management mode] is set to [Input
•
detection]. (see page 65)
[SLOT power link] is set to [On]. (see page 100)
•
●
When set to the USB input, the unit determines video
signals are interrupted by judging the USB memory is
not connected to the USB terminal.
●
This function may not operate correctly depending on
the image playback device.
Screensaver
Alleviates the occurrence of afterimage when displaying
still images or images with 4:3 aspect ratio for a long
time.
[Screensaver] - submenu screen
Screensaver
2022/01/01
Start
Mode
Wobbling
■
Screensaver settings
Screensaver operation
When the Screensaver is operating, the following 5
patterns are displayed full screen for 5 seconds each,
and it will be repeated.
Black → Dark grey → Grey → Light grey → White →
Light grey → Grey → Dark grey
To start Screensaver now
Select [On] in [Mode].
Select [Start] and press <ENTER>.
●
The Screensaver will be activated.
Screensaver
2022/01/01
Start
Mode
Note
●
If the following buttons are pressed while the
screen saver is operating, the screen saver is
cancelled.
Remote control: <RETURN>
Unit: <MENU (Unit)> <INPUT (Unit)>
<+ (Unit)> <- (Unit)>
<ENTER (Unit)>
●
When the display is turned off, the Screensaver will
be deactivated.
SATURDAY
10:00
Off
Off
SATURDAY
10:00
On
To set interval of Screensaver
Select [Interval] in [Mode].
Set [Periodic time].
●
Press
to change the time by 15 minutes.
●
In [ENGLISH(US)] OSD language, [Periodic
time] is displayed as [SHOW DURATION].
Set [Operating time].
●
Press
once to change the time by 1 minute.
Keep pressing down to change the time by 15
minutes.
●
In [ENGLISH(US)] OSD language, [Operating
time] is displayed as [SAVER DURATION].
Screensaver
2022/01/01
Start
Mode
Periodic time
Operating time
[Periodic time]
Deactivated.
Note
●
It is not possible to set the duration of [Operating
time] longer than that of [Periodic time].
To set start and finish time of Screensaver
Select [Time designation] in [Mode].
Set [Start time] and [Finish time].
●
Press
once to change the time by 1 minute.
Keep pressing down to change the time by 15
minutes.
●
In [ENGLISH(US)] OSD language, [Time
designation] is displayed as [TIME OF DAY].
Screensaver
2022/01/01
Start
Mode
Time designation
Start time
Finish time
Note
●
When the current time is displayed as [- -], set
[Date and time] before setting [Start time] and
[Finish time]. (see page 77)
SATURDAY
10:00
Interval
0:00
0:00
[Operating time]
SATURDAY
10:00
0:00
0:00
English
63
Advertisement
Table of Contents
