Table of Contents
Advertisement
Digital ZOOM
Select the screen areas (25 areas) to zoom in, and
zoom in the selected image areas ×2, ×3 or ×4.
(Operate using the remote control. The buttons on the
unit cannot be used for some operations.)
1
Set the digital zoom mode.
Press <ZOOM>.
The screen aspect is set to [Full], and the digital
zoom operation guide is displayed.
2
Select the image areas to zoom in.
Select pressing
Digital Zoom operation guide
3
Switch the zoom ratio for the screen
areas.
Switches every time <ENTER> is pressed.
Exit
×1
×1
●
If no operation is performed for the period set for
[Menu display duration] (see page 91) (5 ‒ 180
seconds) when the zoom ratio for the screen is
"×1", the unit exits the zoom mode.
●
If no operation is performed for approx. 3 seconds
when the zoom ratio for the screen is "×2",
"×3" or "×4", the digital zoom operation guide
display disappears. Pressing any of the
buttons displays the guide again.
44
English
Enter
Select
Exit
Digital Zoom
RETURN
Exit
ENTER
x 1
.
RETURN
Exit
ENTER
x 1
Exit
Exit
×2
×3
×2
×3
4
Exit the digital zoom mode.
Press <RETURN> to exit the mode.
The screen returns to the previous state just before
entering the digital zoom mode, and the digital zoom
operation guide display disappears.
●
Press any of the following buttons to exit the
mode. Then, the operation of the pressed button
is performed.
Remote Control:
<AUTO SETUP> <POSITION> <PICTURE>
<INPUT> <SETUP> <SOUND> <DEFAULT>
<RECALL> <MUTE> <ASPECT>
<OFF TIMER> <FUNCTION> <VOL +>
<VOL -> <1> ‒ <6>
Unit:
<INPUT (Unit)> <MENU (Unit)> <+ (Unit)>
<- (Unit)>
●
When the screen saver timer starts up, the digital
zoom mode finishes.
●
When the power is turned OFF, a force-quit is
performed.
When the power is turned OFF by pressing the
•
<Standby (ON/OFF) button>.
When the display is turned OFF at the <Main
•
Power On / Off button>
When the power is turned OFF by the off-timer
•
When the power is turned OFF by [No signal
•
power off] or "Power management".
Note
●
In the following cases, the digital zoom mode is not
available.
When [Multi display settings] - [Multi screen
•
display] is set to [On]
When [Portrait settings] - [Portrait display] is set
•
to [On]
When the screen saver is in operation
•
When Screen Transfer / USB / MEMORY VIEWER
•
/ WHITEBOARD input is selected.
●
The zoomed image is rougher than the original
image.
●
For multi display use, use the functions in [Multi
display settings]. (see page 75)
Exit
×4
×4
<ENTER (Unit)>
Advertisement
Table of Contents
