Table of Contents
Advertisement
Generating the signing request
When using the server certificate issued by the certification organization as a security certificate, generate a signing
request necessary for application of issuing to the certification organization. Generate the signing request after
generating the CRT key.
1
Click [Certificate] → [Generate Certificate Signing Request] → [Execute].
The page to generate the signing request is displayed.
2
Enter the information required for application.
The details of each item are as follows. Enter the information following the requirement of the certification
organization to apply.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit] Enter the organization unit name.
[CRT key]
3
Click [OK].
The signing request file is generated. Enter a file name and save the file in the desired folder.
4
Enter a file name and click [Save].
The file for signing request is saved in the specified folder.
Note
●
The characters that can be input are as follows.
Single-byte numbers: 0 to 9
•
Single-byte alphabets: A to Z, a to z
•
Single-byte symbols: - . _ , + / ( )
•
●
The signing request generated by the Display is PEM format (file extension: pem).
●
Apply issuing of the server certificate to the certification organization using the saved signing request file (PEM
format).
Enter the Display name or the IP address set in the Display.
Enter the country code defined in ISO 3166-1 alpha-2 (two upper case
alphabets).
Enter the State, etc.
Enter the locality.
Enter the organization name.
[RSA key size] The key length of the current CRT key is displayed.
The generation date and time of the current CRT
[Last modified]
key is displayed.
Details
Character length
limit
664 characters
―
128 characters
128 characters
64 characters
64 characters
―
―
119
English
Advertisement
Table of Contents
