Table of Contents
Advertisement
Cleaning and maintenance
First, remove the mains plug from the mains socket.
Gently wipe the surface of the liquid crystal panel or
cabinet by using a soft cloth to remove dirt.
To remove stubborn dirt or fingerprints on the surface
•
of the liquid crystal panel, dampen a cloth with diluted
neutral detergent (1 part detergent to 100 parts
water), wring out the cloth firmly, and then wipe away
the dirt. Finally, wipe away all the moisture with a dry
cloth.
If water droplets get inside the unit, operating
•
problems may result.
Note
●
The surface of the liquid crystal panel is specially
treated. Do not use a hard cloth or rub the surface
too hard, otherwise this may cause scratches on the
surface.
Usage of a chemical cloth
Do not use a chemical cloth for the liquid crystal panel
•
surface.
Follow the instructions for the chemical cloth to use it
•
for the cabinet.
Avoid contact with volatile substances such as
insect sprays, solvents and thinner.
This may cause damage to the cabinet or cause
•
peeling of the paint. Furthermore, do not leave it in
contact with a rubber or PVC substance for a long
time.
Remove dust and dirt from the ventilation holes
Dust may adhere to the vicinity of the ventilation holes
•
depending on the usage environment. As a result,
if the internal cooling of this unit or circulation of
exhaust heat deteriorates, it may result in a decrease
in brightness or a malfunction. Clean and remove
dust from the ventilation holes.
The amount of dust and dirt that adheres depends on
•
the installation location and usage time.
Disposal
When disposing the product, ask your local
authority or dealer about the correct methods of
disposal.
13
English
Advertisement
Table of Contents
