Checking The Oil Level In The Exciter Housing - Fayat Group DYNAPAC DRP70D Operating Instruction

Maintenance – As required
Fig. 109
Concluding work
Fig. 110
8.11.4

Checking the oil level in the exciter housing

96
2. Turn the outer V-belt pulley with the suitable tool, until the
required belt tension is achieved.
Counter the inner V-belt pulley with a suitable
tool.
3. Retighten the threaded pins, tightening torque: 10 Nm
(7.4 ft·lbf).
1. Fasten the V-belt guard (1).
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä Chapter 8.4 „List of fuels and lubri-
cants" on page 71.
– Do not use low-ash engine oils for the exciter
shaft housing.
Protective equipment:
1. Park the machine on level ground.
2. Park the machine safely
in secured condition" on page 57.
3. Allow the machine to cool down.
DRP70D
n Working clothes
Safety shoes
n
Protective gloves
n
Ä Chapter 6.4 „Parking the machine