Fayat Group DYNAPAC DRP70D Operating Instruction page 67

Fig. 56
Maintenance – Preparations/concluding work
Protective equipment:
1. Allow the engine to cool down.
2. Check the engine oil level, top up if necessary.
The fuel tank must be full when bleeding.
3. Check the fuel level, top up if necessary.
4. Press the ventilation lever for approx. 15 seconds against the
spring.
ð The engine is ready for starting.
If the engine does not start after
bleeding, contact our customer service
department.
DRP70D
n Working clothes
n Safety shoes
n Protective gloves
67