Starting And Stopping Route Navigation; Changing The Destination; Selecting Automatic Or Manual Routing - Standard Horizon HX890E Owner's Manual

11.2.2 Starting and Stopping Route Navigation

Press

key
(
1. Select the desired category ("HISTORY" or
"MEMORY"), then press the [SELECT] soft key.
2. Press the [CH▼]/[CH▲] key to select a route,
then press the [SELECT] soft key. The navi-
gation screen with "RTE" indicator appears.
3. A message "ARRIVED" will appear when
you have reached the first target point.
To start navigation to the next target, press
the [YES] soft key.
4. T o stop the navigation, press [◄]/[►]key,
then press the [STOP] soft key.
5. Press the [CLR] key to return to radio operation.

11.2.3 Changing the Destination

1. On the navigation screen, press one of the
soft keys, then press the [NEXT TG] soft key.
2. Press the [CH▼]/[CH▲] key to select the
desired destination.
3. Press the [ENTER] soft key. The navigation
screen with a new destination appears.

11.2.4 Selecting Automatic or Manual Routing

Use this selection to start navigation to the next target automatically or manu-
ally when your vessel has arrived at a target point.
Press and hold

key
1. Select "AUTO" or "MANUAL" with the [CH▼]/[CH▲] key,
then press the [ENTER] soft key.
2. Press the [CLR] key to return to radio operation.
70
/ / / key)
WAYPOINT SETUP
( / key)
SELECT
 
( key)
RTE
N-UP
RTE
N-UP
RTE
N-UP
SELECT
 
( key)
ROUTE
( / key)
ROUTE
HISTORY
MEMORY
KAREN
BOB
BACK SELECT
366901254
Horizon-1
RX USA HI Standard
25
Horizon-2
USCG
DW-16
BACK
BRG
T
300 °
DST
km
35.2
SOG
kph
20nm 36.0
WPT KAREN
USA HI
RX
25
DW-16
BRG
T
300 °
DST
km
35.2
SOG
kph
20nm 36.0
WPT:KAREN
Via1:001WPT
STOP NEXT TG FUNC
Via2:002WPT
DISPLAY RANGE
RX USA HI
ARRIVED RANGE
25
ROUTING OPERATION
DW-16
BACK
BRG
T
300 °
DST
km
25.2
SOG
kph
20nm 36.0
Via2 002WPT
ROUTING OPERATION

( / key)
WAYPOINT SETUP
ROUTING OPERATION
BACK
SELECT

( key)
ROUTE
HISTORY
SELECT
ROUTE
TARGET
ENTER
SELECT
( key)
AUTO
MANUAL
ENTER