Standard Horizon HX890E Owner's Manual page 67

4. W hen finished editing the position, press the [FINISH] soft key.
5. Select "SAVE" with the [CH▼]/[CH▲] key, then press the [SELECT] soft
key to save the mark position into memory.
6. Press the [CLR] key to return to radio operation.
Adding a Waypoint
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select
"ADD", then press the [SELECT] soft key.
2. Press the [CH▼]/[CH▲] key to select
"NAME", then press the [SELECT] soft key.
3. Enter the waypoint name by pressing the
[CH▼]/[CH▲] key and the [SELECT] soft
key.
When finished entering the name, press the
[FINISH] soft key.
4. Press the [CH▼]/[CH▲] key to select
"POSITION", press the [SELECT] soft key,
then enter the coordinates.
When finished entering the position, press the [FINISH] soft key.
5. Select "SAVE" with the [CH▼]/[CH▲] key, then press the [SELECT] soft
key to save the waypoint into memory.
6. Press the [CLR] key to return to radio operation.
Editing a Waypoint
This function allows a previously entered waypoint to be edited.
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select
"EDIT", then press the [SELECT] soft key.
2. Press the [CH▼]/[CH▲] key to select
the waypoint to be edited, then press the
[SELECT] soft key to show the waypoint
input screen.
WAYPOINT SETUP

( / key)
WAYPOINT SETUP

( / key)
SELECT
WAYPOINT DIR.

( key) (
WAYPOINT SETUP
WAYPOINT DIR.
BACK
WAYPOINT DIR.
NAME:
STANDARD---------
POSITION:
34 ° 25.9755
118 ° 59.4566
BACK
SELECT
WAYPOINT DIR.

(
( key)
WAYPOINT SETUP
WAYPOINT DIR.
BACK

/ key) (
ADD
EDIT
DELETE
WAYPOINT DIR.
NAME:
001WPT----------
SELECT
POSITION:
-- ° --.----
--- ° --.----
SAVE
BACK
N
W
SAVE
ENTER

/ key)
(
ADD
EDIT
DELETE
WAYPOINT DIR.
EDIT
366901254
BOB
SELECT
Horizon-1
Horizon-2
KAREN
Standard
USCG
BACK
SELECT
key)
-
-
SELECT
SELECT
key)
SELECT
65