Transmitting An Individual Call - Standard Horizon HX890E Owner's Manual
Class-h dsc gps transceiver
Hide thumbs
Also See for HX890E:
- Owner's manual (116 pages) ,
- Firmware update instruction manual (5 pages)
Table of Contents
Advertisement
10.4.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
is similar to calling a vessel on CH16 and requesting the operator to go to
another working channel.
Individual Call using the Individual/Position Directory
Press
key
(
1. Press the [CH▼]/[CH▲] key to select
"HISTORY" or "MEMORY", then press the
[SELECT] soft key.
2. Press the [CH▼]/[CH▲] key to select an
individual you want to contact, then press
the [SELECT] soft key.
3. Press the [CH▼]/[CH▲] key to select the
operating channel you want to communi-
cate on, then press the [SELECT] soft key.
To select an operating channel from all the
voice channels, press the [MANUAL] soft
key.
4. Press the [YES] soft key to transmit the
individual DSC signal.
5. When an individual call acknowledgment is
received, the established channel is auto-
matically changed to the channel which is
selected on step 3 above and a ringing tone
sounds.
6. Press the [QUIT] soft key to listen to the
channel to make sure it is not busy, then
press the PTT button and talk into the micro-
phone to the other vessel.
42
/
/
/
key)
SELECT
INDIVIDUAL
(
key)
INDIVIDUAL CALL
HISTORY
MEMORY
NEW ID
BACK
INDIVIDUAL CALL
BACK
INDIVIDUAL CALL
(
/
key)
INDIVIDUAL CALL
KAREN
BOB
SELECT
366901254
Horizon-1
Standard
Horizon-2
INTERSHIP CH
USCG
06
BACK
CH:
08
CH:
09
INDIVIDUAL CALL
CH:
10
CH:
13
CH:
CATEG:
MANUAL
SELECT
Do you want to
987654321
transmit a Call?
Horizon-1
YES
ROUTINE
CATEG:
26
CH:
INDIVIDUAL CALL
Transmitting
CATEG:
SINCE:
Waiting for ACK
RESEND
SELECT
(
key)
HISTORY
SELECT
987654321
Horizon-1
ROUTINE
26
CH:
NO
987654321
Horizon-1
ROUTINE
26
CH:
00:05
QUIT
Advertisement
Table of Contents
