Gm Operation; Setting Up Gm Operation; Setting Up Group Directory - Standard Horizon HX890E Owner's Manual
Class-h dsc gps transceiver
Hide thumbs
Also See for HX890E:
- Owner's manual (116 pages) ,
- Firmware update instruction manual (5 pages)
Table of Contents
Advertisement
12. GM OPERATION
The GM (Group Monitor) feature of the HX890 utilizes the same system as
the DSC Group call and Auto Position Polling, to display the group members'
locations.
12.1 SETTING UP GM OPERATION
The HX890 is capable of storing up to 10 groups with 1 to 9 members each.
12.1.1 Setting Up Group Directory
● For this function to operate, the same group MMSI must be
programmed into each transceiver of group members to be moni-
tored. Refer to section "10.5.1 Setting up a Group Call" for details.
● Group members for GM operation can only be selected from the
Individual/Position Call directory, therefore all members that you want
to monitor must be stored in the directory. Refer to section "10.4.1
Setting up the Individual Call Directory" for details.
Press and hold
key
1. Select "ADD" with the [CH▼]/[CH▲] key,
then press the [SELECT] soft key.
2. Select "NAME" with the [CH▼]/[CH▲] key,
then press the [SELECT] soft key.
3. Enter a name for the route by pressing the
[CH▼]/[CH▲] key and the [SELECT] soft
key.
When finished entering the name, press the
[FINISH] soft key.
4. Select "GM ID" with the [CH▼]/[CH▲] key, press the [SELECT] soft key,
then enter the group MMSI number.
When finished entering the MMSI, press the [FINISH] soft key.
5. Select "MEMBERS" with the [CH▼]/[CH▲]
key, then press the [SELECT] soft key.
GM SETUP
(
/
key)
NOTE
SELECT
GM GROUP DIR.
(
(
key)
GM GROUP DIR.
BACK
GM GROUP DIR.
NAME:
STANDARD---------
GM ID:
087654321
BACK
/
key)
GM SETUP
ADD
EDIT
DELETE
GM GROUP DIR.
NAME:
-----------------
SELECT
GM ID:
0--------
MEMBERS
BACK
MEMBERS
SAVE
SELECT
SELECT
(
key)
SAVE
SELECT
71
Advertisement
Table of Contents
