Esc = N - Epson TM-T88IIP Manual

Confidential

ESC = n

[Name] Set peripheral device
[Format] ASCII
Hex
Decimal
1 £ n £ 3
[Range]
[Description] Selects device to which host computer sends data, using n as follows:
Bit Off/On Hex
0 Off 00
On 01
1-7 - -
· When the printer is disabled, it ignores all data except for error-recovery
[Notes]
commands (DLE EOT, DLE ENQ, DLE DC4) until it is enabled by this
command.
[Default] n = 1
ESC ? n
[Name] Cancel user-defined characters
[Format] ASCII
Hex
Decimal
32 £ n £ 126
[Range]
[Description] Cancels user-defined characters.
· This command cancels the pattern defined for the character code specified by
[Notes]
n . After the user-defined characters is canceled, the corresponding pattern for
the internal character is printed.
· This command deletes the pattern defined for the specified code in the font
selected by ESC !.
· If a user-defined character has not been defined for the specified character
code, the printer ignores this command.
[Reference] ESC &, ESC %
TITLE
ESC =
1B 3D
27 61
Decimal Function
0 Printer disabled.
1 Printer enabled
- Undefined.
ESC ?
1B 3F
27 63
TM-T88 II II II II series
Specification
(STANDARD)
n
n
n
n
n
n
NO.
SHEET
REVISION
NEXT
D
SHEET
86
87