Table of Contents
Advertisement
Confidential
(5) Printable area
The maximum range within which printing is possible under the printer specifications. The
printable area for this printer is as follows:
The length of the horizontal direction in standard mode:
approximately 72.2 mm (512/180 inch)
approximately 50.8 mm (360/180 inch); for 58mm paper width model
The length of the horizontal direction in page mode:
approximately 72.2 mm (512/180 inch)
approximately 50.8 mm (360/180 inch); for 58mm paper width model
The length of the vertical direction in page mode: approximately 117.263 mm (1662/360 inch)
(6) Printing area
Printing range is set by the command. It must be printing area £ printable area.
(7) Ignore
The state in which all codes, including parameters, are read in and discarded, and nothing
happens.
(8) Inch
A unit of length. One inch is 25.4 mm.
(9) MSB
Most Significant Bit
(10) LSB
Least Significant Bit
(11) Base line
Standard position when character data is stored in the print buffer.
Normal character in standard mode and page mode:
A y
Rotated character in standard mode (only when font A is selected):
TITLE
*1
21 dots
Base line
10 dots
TM-T88 II II II II series
Specification
(STANDARD)
*1.When font A (12´21 dots) is selected, this
height is for 24 dots.
When font B (9´17 dots) is selected, this
height is for 16 dots.
Base line
SHEET
REVISION
D
NO.
SHEET
NEXT
65
66
Advertisement
Table of Contents
