Table of Contents
Advertisement
Confidential
-
ESC
n
[Name]
Turn underline mode on/off
[Format]
ASCII
Hex
Decimal
0 £ n £ 2, 48 £ n £ 50
[Range]
[Description] Turns underline mode on or off, based on the following values of n :
n
Function
0, 48
Turns off underline mode
1, 49
Turns on underline mode (1-dot thick)
2, 50
Turns on underline mode (2-dots thick)
· The printer can underline all characters (including right-side character spacing),
[Notes]
but cannot underline the space set by HT.
· The printer cannot underline 90° clockwise rotated characters and white/black
inverted characters.
· When underline mode id turned off by setting the value of n to 0 or 48, the
following data is not underlined, and the underline thickness set before the
mode is turned off does not change. The default underline thickness is 1 dot.
· Changing the character size does not affect the current underline thickness.
· Underline mode can also be turned on or off by using ESC !. Note, however,
that the last received command is effective.
· This command does not affect the setting of Kanji characters.
[Default]
n = 0
[Reference]
ESC !
ESC 2
[Name]
Select default line spacing
[Format]
ASCII
Hex
Decimal
[Description] Selects 1/6-inch line (approximately 4.23mm) spacing.
· The line spacing can be set independently in standard mode and in page mode.
[Notes]
[Reference]
ESC 3
TITLE
-
ESC
1B
2D
27
45
ESC
2
1B
32
27
50
TM-T88 II II II II series
Specification
(STANDARD)
n
n
n
NO.
SHEET
REVISION
NEXT
D
SHEET
84
85
Advertisement
Table of Contents
