Esc L - Epson TM-T88IIP Manual

Confidential

ESC L

[Name] Select page mode
[Format] ASCII
Hex
Decimal
[Description] Switches from standard mode to page mode.
· This command is enabled only when processed at the beginning of a line in
[Notes]
standard mode.
· This command has no effect in page mode.
· After printing by FF is completed or by using ESC S, the printer returns to
standard mode.
· This command sets the position where data is buffered to the position specified
by ESC T within the printing area defined by ESC W.
· This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
page mode:
Set right-side character spacing: ESC SP, FS S
Select default line spacing: ESC 2, ESC 3
· Only valve settings is possible for the following commands in page mode; these
commands are not executed.
Turn 90° clockwise rotation mode on/off: ESC V
Select justification: ESC a
Turn upside-down printing mode on/off: ESC {
Set left margin: GS L
Set printable area width: GS W
·The following command is ignored in page mode:
À Execute test print: GS ( A
· The following command is not available in page mode:
Print NV bit image: FS p
- Define NV bit image: FS q
 Write to user NV memory: FS g 1
à Print raster bit image: GS v 0
· The printer returns to standard mode when power is turned on, the printer is
reset, or ESC @ is used.
[Reference] FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \, 3.12 Page Mode
TITLE
ESC L
1B 4C
27 76
TM-T88 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
D
91
SHEET
90