Table of Contents
Advertisement
Confidential
APPENDIX K COMPARISON TABLE BETWEEN TM-T88II II II II
1. Printing speed for receipt
High speed mode
Low speed mode
ladder bar code
2. Font B
3. Non-volatile bit image
buffer area
4. ESC/POS commands
5. Low power consumption
mode
6. Adaptability to high speed
parallel interface
7. User NV memory
8. Multilingual support
20
AND TM-T88
TM-T88II
120 mm/sec maximum
--
Approximately 42 mm/sec
9 ´ 17 dots
256K bytes
ESC M:
Select character font
FS p:
Print NV bit image
FS q:
define NV bit image
DLE DC4: Generate pulse at real
time
FS g 1:
Write to user NV memory
FS g 2:
Read from user NV
memory
GS ( A:
Execute test print
When DIP switches 2-3 and 2-4 are
set to ON, printing speed is fixed to
70 mm/sec. In this mode, the power
consumption is almost same as the
TM-T88.
Possible with a combination of UB-
P02.
1 K byte
Japanese Kanji
Chinese Kanji
Taiwanese Kanji
Thai character
Depending on the model type, one of
these character is supported.
TITLE
TM-T88 II II II II series
Specification
(STANDARD)
TM-T88
Approximately 70 mm/sec
Approximately 50 mm/sec
Approximately 35 mm/sec
9 ´ 24 dots
None
Not supported.
None
(When DIP switches 2-3 and
2-4 are set to ON
respectively, the most light of
print density is set.)
Impossible
None
Japanese Kanji only
NO.
SHEET
REVISION
NEXT
D
App. 21
END
SHEET
App. 20
Advertisement
Table of Contents
