Epson TM-T88IIP Manual page 42

Confidential
Command
GS h Set bar code height
GS k Print bar code
GS r Transmit status
GS v 0 Print raster bit image
GS w Set bar code width
Kanji command list (when the TM-T88IIM/TM-T88IIPM is used)
Command
Set print mode(s) for Kanji characters
FS !
Select Kanji character mode
FS &
Turn underline mode on/off for Kanji characters
FS –
FS . Cancel Kanji character mode
Define user-defined Kanji characters
FS 2
Select Kanji character code system
FS C
Set left- and right-side Kanji character spacing
FS S
Turn quadruple-size mode on/off for Kanji
FS W
characters
Command classification
Executing: Printer executes the command, which does not then affect the following data.
Setting: Printer uses flags to make settings, and those settings affect the following data.
Standard mode
¡:
Enabled.
(¡): Enabled only when the command is set at the beginning of a line.
l:
Enabled only when data is not present in the printer buffer.
Page mode
¡:
Enabled.
s:
Only value setting is possible.
Disabled: Parameters are processed as printable data.
Ignored: All command codes including parameters are ignored and nothing is executed.
Name
Name
TITLE
TM-T88 II II II II series
Specification
(STANDARD)
Command
Standard
classification
mode
Executing Setting
¡ ¡
l
¡
¡ ¡
¡
¡ ¡
Command
Standard
classification
mode
Executing Setting
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
¡ ¡
NO.
SHEET
REVISION
NEXT
D
32
Page GS P
mode function
¡
¡
¡
¡
Page GS P
mode function
¡
¡
¡
¡
¡
¡
¡ ¡
¡
SHEET
31