ABB AC500 V3 System Manual page 67

Automation builder, programmable logic controllers, control panels
Hide thumbs Also See for AC500 V3:
Table of Contents

Advertisement

Fig. 16: Disconnect wire from the spring terminal (steps 4 ... 6)
1.
2.
3.
4.
5.
6.3.1.4
Terminals for CANopen communication modules
Fig. 17: Combicon, 5-pole, female, removable plug with spring terminals
Fig. 18: Combicon, 5-pole, female, removable plug with spring terminals
2023/03/03
Conductor
4
Terminal with wire connected
Insert screwdriver (2.5 x 0.4 ... 3.5 x 0.5 mm) at an angle, screwdriver must be at least 15
mm free of insulation at the tip
While erecting the screwdriver, insert it until the stop (requires a little strength) - terminal is
now open
Remove wire from the open terminal
Done
3ADR011074, 1, en_US
Screwdriver
5
Connection and wiring > AC500
6
Wiring
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac500-eco v3Ac500-xc v3Ac500-sCp600Cp600-ecoCp600-pro

Table of Contents