Table of Contents
Advertisement
Mechanical planning and installation
Mounting and demounting the S500-eCo I/O module
5.9.5 Mounting of TA5301-CFA
1
TA5301-CFA cable fixing accessory
2
2 openings on the PM50x2 processor module
5.10
Mounting and demounting the S500-eCo I/O module
S500-eCo I/O modules can be mounted either on a DIN rail or with screws on a metal plate.
Mounting I/O
modules on a
DIN rail
1.
46
Insert the TA5301-CFA cable fixing accessory into the two openings on the PM50x2
processor module marked white in the figure.
NOTICE!
Risk of function faults!
The S500-eCo I/O modules are grounded via the DIN rail.
The DIN rail must be included into the grounding concept of the plant.
Use only metal screws.
Mount I/O module at the top of the DIN rail, then snap it in below.
3ADR011074, 1, en_US
2023/03/03
Advertisement
Table of Contents
