Changing The Fuses Of Individual Power Consumers - Husqvarna FE 250 2019 Owner's Manual

15.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
F00358-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. (
Main work
–
Pull EFI control unit
F00359-10
https://www.motorcycle-manual.com/
ELECTRICAL SYSTEM 15
2
.
3
.
A
4
is located in the starter relay.
p. 142)
p. 66)
p. 67)
while the engine is idling until
p. 67)
p. 66)
1
off the holder and hang to the side.
.
107