Activating Traction Control - Husqvarna FE 350 EU 2020 Owner's Manual

Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
–
Always run the engine warm at a low speed.
9.3

Activating traction control

Warning
Voiding of the government approval for road use and the insurance coverage If the combination
switch is mounted, the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote from public road traffic if the combination
switch is installed.
Info
The traction control reduces excessive slip on the rear wheel in favor of more control and propulsion,
particularly in wet conditions.
When traction control is switched off, the rear wheel may spin more during high acceleration and on sur-
faces with low grip.
Traction control can be switched on or off during the ride.
The setting most recently selected is activated again when restarting.
–
Take the motorcycle off side stand
stand with rubber strap
–
Shift the transmission into neutral.
(EU)
–
Turn the emergency OFF switch to the position
Condition
Ambient temperature: < 20 °C (< 68 °F)
–
Push the cold start button in all the way.
401944-10
–
Press the start button.
Info
Press the start button for a maximum of 5 seconds.
Wait for 30 seconds before a further attempt at start-
ing.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-
ion battery and thereby increase the starting power.
During the starting process, the malfunction indicator
400733-01
lamp lights up.
RIDING INSTRUCTIONS 9
1
and secure the side
2
.
.
37