F U S E R E P L A C E M E N T
The flight case features a replaceable fuse. To replace, disconnect the flight case from the power
source, then use a screw driver to unscrew the fuse holder located beside the power ports. Remove
the bad fuse and replace with a new one, then screw the fuse holder back in. Replace only with a
new fuse of the same type and rating.
B A T T E R Y L I F E
Following any software update, the battery life information setting must be reset before it will display
accurate information. This can be done by following the steps below:
1. Navigate to Battery > Operation Mode in the system menu and make sure that the device is set to
either Standard 6 or Saver 10.
2. Navigate to Battery > Current Life in the system menu.
3. Press and hold the UP button until the device flashes amber once. The device should now display
an accurate battery life reading.
45