ADJ MIRAGE Q6 PAK BLACK User Manual page 16

I N S T A L L A T I O N
CLAMP INSTALLATION
The Mirage Q IP Black features a mounting clamp attachment point on the side of the device (see the
illustration below). When mounting the fixture to a truss or any other suspended or overhead installa-
tion, be sure to secure appropriately rated clamps (not included) to the clamp attachment point.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load
limits, understanding the installation material being used, and periodic safety inspection of all installa-
tion material and the fixture itself. If you lack these qualifications, do not attempt to perform the instal-
lation yourself. Improper installation can result in bodily injury.
CHARGING PORT CAP
In order to maintain IP65 integrity, the charge port of each device must be sealed off using the
attached rubber cap when the charging port is not in use.
Charging Port
Cap (in place)
16