ADJ MIRAGE Q6 PAK BLACK User Manual page 17

I N S T A L L A T I O N
KICKSTAND FOR FLOOR PLACEMENT
The Mirage Q IP Black can also be placed on the floor to provide an uplighting display, and features a
retractable kickstand that allows the device to be angled in the direction of the desired display. Make
sure that the rubber cap is secured over the charge port to maintain the device's IP65 rating.
To deploy the kickstand, simply toggle the switch on the underside of the device, near the power
charging port (1). The kickstand can then be deployed from the underside (2) at various notched
increments, allowing a maximum angle of 35 degrees from the vertical axis (3).
Note: If set and activated, the alarm will be triggered by any movement of the device, including
knocking over the device. The alarm will sound and the device will strobe red for the amount
of time that was set in the "Alarm Time" setting, but will automatically stop when the device is
returned to its place. Please be aware of this feature in the event that you decide to re-locate
or re-position the device after the initial setup!
17