Table of Contents
Advertisement
FusionServer G8600 V7 Server
Technical White Paper
A100 GPU module (HGX A100 8-GPU)
Recommended slots:
12 V 2000 W PSU slots: PSU 1 and
PSU 2.
54 V 3000 W PSU slots: PSU 3, PSU 4,
PSU 5, and PSU 6.
Recommended PDU connection modes:
12 V 2000 W PSUs
● PSU 1 is connected to the PDU of
● PSU 2 is connected to the PDU of
54 V 3000 W PSUs
● The PSU 3-A, PSU 4-A, PSU 5-A,
Figure 5-29 Connection mode of the
A100
5.9 Fan Modules
●
●
●
●
Issue 03 (2023-09-15)
input A through a C13 cable.
input B through a C13 cable.
and PSU 6-A are connected to the
PDU of input A through C19 cables.
Supports 15 fan modules. Ten of them are located on the rear panel to dissipate
heat from the GPU modules. The other five are located in the system enclosure
to dissipate heat from the CPUs, memory modules, drives, and NICs.
Supports hot swap.
Supports N+1 redundancy. That is, the server can work properly when a single
fan fails.
Supports intelligent fan speed adjustment.
Copyright © xFusion Digital Technologies Co., Ltd.
5 Hardware Description
H100 GPU module (HGX H100 8-GPU)
Recommended slots:
12 V 2000 W PSU slots: PSU 1 and
PSU 2.
54 V 3000 W PSU slots: PSU 3, PSU 4,
PSU 5, and PSU 6.
Recommended PDU connection modes:
12 V 3000 W PSUs
● PSU 1 is connected to the PDU of
input A through a C19 cable.
● PSU 2 is connected to the PDU of
input B through a C19 cable.
54 V 3000 W PSUs
● The PSU 3-A, PSU 4-A, PSU 5-A,
and PSU 6-A are connected to the
PDU of input A through C19 cables.
● The PSU 3-B, PSU 4-B, PSU 5-B,
and PSU 6-B are connected to the
PDU of input B through C19 cables.
Figure 5-30 Connection mode of the
H100
53
Advertisement
Table of Contents
