Advertisement
1. INSTALLATION VIEW
2. PARTS
• Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches,
or damage.
Part
5223989
* Included with KSD5 V3 460 only
Part name
Qty
Mud fl ap
(rear)
Each 1
RH/LH
Fastener
2
Clip nut
4
Web guide
1
(For Europe)
Mud flap (rear)
Part
GENUINE MUD FLAP (REAR)
INSTALLATION AND USER'S INSTRUCTIONS
Thank you for purchasing a Genuine Mazda Accessory.
Before removal and installation, Please thoroughly read these instructions.
For your safety, please read the contents of this booklet to properly install and use the mud fl ap (rear).
Keep these instructions with your vehicle records for future reference.
WARNING
•
There are several
WARNING and
CAUTION sections in this booklet concerning safety when installing or
removing the mud fl ap (rear). Always read and follow the instructions in order to prevent injuries, accidents, and
possible damage to the vehicle.
WARNING
: Indicates a situation in which serious injury or death could result if the warning is ignored.
CAUTION
: Indicates a situation in which bodily injury or damage to the vehicle could result if the
caution is ignored.
• For areas indicating the tightening torque in this instruction manual, tighten to the specifi ed torque by using a
torque wrench. For areas in which the tightening torque is indicated inside parentheses ( ), the tightening torque is
indicated as a reference value, however tightening using a torque wrench is not necessary.
• Do not modify the mud fl ap (rear).
• Do not install the mud fl ap (rear) in any way other than described in the following instructions.
• If in doubt, please contact your Mazda dealer to install the accessory in order to prevent errors in installation.
• If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before using it.
• Mazda and its suppliers are not responsible for injuries, accidents, and damage to persons and property that arise
from the failure of the dealer or installer to follow these instructions.
• To ensure safety and reliability of the work, installation, removal and disposal work must be carried out by an
Authorized Mazda Dealership.
• Be careful not to lose removed parts, and be sure that they are kept free of dirt, scratches, or damage.
NOTE
To the dealer
• Please turn over these instructions to the customer after installation.
To the customer
• Keep these instructions after installation. The instructions may be necessary for installing
other optional parts or removal of this accessory.
• Should the vehicle or this accessory be resold, Always transfer these instructions to the
next owner.
MAZDA MOTOR CORPORATION
3-1 Shinchi, Fuchu-cho, Aki-gun, Hiroshima 730-8670
* Included with KPF1 V3 460 only
2
Part name
Qty
Bolt
6
Well nut
2
Installation and
user's instructions
(English/French/
Each 1
Spanish)
(Other than Europe)
Advertisement
