Table of Contents
Advertisement
Available languages
Available languages
Quick Links
GENUINE SEAT COVERS
INSTALLATION AND USER'S INSTRUCTIONS
Thank you for purchasing a Genuine Mazda Accessory.
Before removal and installation, be sure to thoroughly read these instructions.
Please read the contents of this booklet to properly install and use the seat covers. Your safety
depends on it.
Keep these instructions with your vehicle records for future reference.
There are several
when installing or removing the seat covers. Always read and follow the instructions in order to
prevent injuries, accidents, and possible damage to the vehicle.
WARNING:
CAUTION:
Do not modify the seat covers.
Do not install the seat covers in any way other than described in the following instructions.
If in doubt, please contact your Mazda dealer to install the accessory in order to prevent errors
in installation.
Flammable or dangerous materials should not be transported in your vehicle at any time.
If any corrosive chemicals are spilled on your seat covers, it should be cleaned as described
in the Care and Cleaning section.
If you have any questions about the use of the accessory, ask your Mazda dealer for proper
advice before using it.
Mazda and its suppliers are not responsible for injuries, accidents, and damage to persons and
property that arise from the failure of the dealer or installer to follow these instructions.
To ensure safety and reliability of the work, installation, removal and disposal work must be
carried out by an Authorized Mazda Dealership.
Be careful not to lose removed parts, and be sure that they are kept free of dirt, scratches, or
damage.
PART NAME
PART NUMBER : 0000-8K-R08 OR 0000-8K-R10 OR 0000-8K-R12
VEHICLE
NOTE
To the dealer
Please turn over these instructions to the customer after installation.
To the customer
Keep these instructions after installation. The instructions may be necessary for
installing other optional parts or removal of this accessory.
Should the vehicle or this accessory be resold, always leave these instructions with
it for the next owner.
WARNING
WARNING and
Indicates a situation in which serious injury or death could result if
the warning is ignored.
Indicates a situation in which bodily injury or damage to the vehicle
could result if the caution is ignored.
: SEAT COVERS (2ND ROW)
: MAZDA CX-5
CAUTION sections in this booklet concerning safety
1
0000-8K-R08_0
Advertisement
Table of Contents
Related Manuals for Mazda 0000-8K-R08
Summary of Contents for Mazda 0000-8K-R08
- Page 1 Do not modify the seat covers. Do not install the seat covers in any way other than described in the following instructions. If in doubt, please contact your Mazda dealer to install the accessory in order to prevent errors in installation.
-
Page 2: Table Of Contents
1. INSTALLATION VIEW 0000-8K-R08 (for Cloth Trim) HEAD RESTRAINT COVERS RIGHT SECOND ROW SEAT BACK COVER CENTER SECOND ROW SEAT BACK COVER LEFT SECOND ROW SEAT BACK COVER SECOND ROW SEAT CUSHION COVER 0000-8K-R10 (for Leather Trim) 0000-8K-R12 (for Leatherette Trim) -
Page 3: 0000-8K-R08 (For Cloth Trim)
2. PARTS Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches, or damage. 0000-8K-R08 (for Cloth Trim) Part Name Qty. Part Name Qty. Part Name Qty. 2nd Row 2nd Row... -
Page 4: Head Restraint Covers
3. BEFORE INSTALLATION 4. INSTALLATION WARNING Remove the head restraints from the second row Before performing any work, park the seats by pushing the knobs on the head restraint vehicle on level ground, apply the guides. parking brake securely, and then block 3 HEAD the wheels. -
Page 5: Right Second Row Seat
Install the right second row seat-back cover on the Install the fasteners on the underside of the right second ow seat-back. head restraints. HEAD RESTRAINT COVER Insert cover under the RIGHT SECOND ROW head restraint. SEAT-BACK COVER Ensure the label is on the front side of the cover. -
Page 6: Center Second Row Seat
Install the left second row seat back cover. Instal l the center second row seat back cover (Cloth Trim). Insert cover CENTER under the SECOND ROW head restraint. SEAT BACK COVER LEFT SECOND ROW Insert cover SEAT BACK under the COVER head restraint. - Page 7 Si se derraman sustancias químicas corrosivas en las cubiertas del asiento, se debe limpiar como se describe en la sección Cuidado y Limpieza. Si tiene alguna pregunta sobre el uso del accesorio, pida a su concesionario Mazda que le aconseje antes de usarlo.
-
Page 8: Second Row Seat Cushion Cover
1. VISTA DE INSTALACION 0000-8K-R08 (Guarnición de paño) CUBIERTAS DE RETENCIÓN DE CABEZA (2a FILA) CUBIERTA DE ASIENTO TRASERO (DERECHA, 2a FILA) CUBIERTA DE LA ASIENTO TRASERO (CENTRO, 2a FILA) CUBIERTA DE ASIENTO TRASERO (IZQUIERDA, 2a FILA) CUBIERTA DEL COJÍN DEL ASIENTO (IZQUIERDA, 2a FILA) 0000-8K-R10 (Guarnición de cuero) 0000-8K-R12 (Guarnición de cuero sintetico) - Page 9 0000-8K-R08 (Guarnición de deporte), 0000-8K-R10 (Guarnición de gran turismo), 2. PARTES 0000-8K-R12 (Guarnición de turismo) Las piezas que se muestran a continuación no están a escala. Antes de instalación, verifique que el kit incluya todas las piezas siguientes y que estén libres de suciedad, arañazos o daños.
- Page 10 3. ANTES DE INSTALAR 4. INSTALACIÓN ADVERTENCIA Retire los reposacabezas de los asientos de la Antes de realizar cualquier trabajo, estacione segunda fila presionando los mandos de las guías el vehículo en terreno nivelado, aplique el de retención de la cabeza. freno de estacionamiento con seguridad y luego bloquee las ruedas.
- Page 11 Instale los sujetadores en la parte inferior de los Instale la cubierta de la segunda fila en el respaldo reposacabezas. de la segunda fila derecha. CUBIERTA DE Inserte la REPOSACABEZA CUBIERTA DEL cubierta RESPALDO debajo del (DERECHA, reposacabezas. 2a FILA) Asegúrese de que la etiqueta esté...
- Page 12 Instale la cubierta del asiento respaldo (Izquierda, Instale la cubierta del asiento respaldo (Centro, 8a. . 2a Fila). 2a Fila) (Guarnición de paño). Inserte la CUBIERTA DE cubierta ASIENTO RESPALDO CUBIERTA DE debajo del (CENTRO, ASIENTO RESPALDO reposacabezas. 2a FILA) (IZQUIERDA, 3a FILA) Inserte la...
- Page 13 Si vous avez des questions sur l'utilisation de l'accessoire, demandez conseil à votre concessionnaire Mazda avant de l'utiliser. Mazda et ses fournisseurs ne sont pas responsables des blessures, des accidents et des dommages aux personnes et aux biens qui découlent du défaut du concessionnaire ou de l'installateur de suivre ces instructions.
- Page 14 1. VUE D'INSTALLATION 0000-8K-R08 (Garniture de Tissu) HOUSSES D’APPUIE-TÊTE (2ème RANGÉE) HOUSSE DU DOSSIER DE SIÈGE (DROIT, 2ème RANGÉE) HOUSSE DU DOSSIER DE SIÈGE (CENTRE, 2ème RANGÉE ) HOUSSE DU DOSSIER DE SIÈGE (GAUCHE, 2ème RANGÉE) HOUSSE DU COUSSIN DE SIÈGE (2ème RANGÉE)
- Page 15 2. PIÈCES Avant l'installation, vérifiez que la trousse comprend toutes les pièces suivantes et qu'elles sont exemptes de saletés, de rayures ou de dommages. 0000-8K-R08 (Garniture de Tissu) Pièce Qté. Pièce Qté. Pièce Numèro Qté. Housses Housse Housse d’appuie- d’appuie- du siège...
- Page 16 3. AVANT L'INSTALLATION 4. INSTALLATION ATTENTION Retirer les appuie-tête des sièges de la deuxième Avant d'effectuer un travail, placer le véhicule rangée en appuyant sur les boutons des guides de sur une surface plane, engager le frein de retenue de l’appuie-tête. stationnement, puis bloquer les roues.
- Page 17 Installez la housse du dossier droit de la Installez les fixations sur le dessous des deuxième rangée sur le dossier droit de la appuie-tête. deuxième rangée. HOUSSE D’APPUIE-TÊTE Insérez la housse sous les guides de retenue de la tête. Assurez-vous que l'étiquette se trouve sur la face avant du couvercle.
- Page 18 Installez la housse du dossier du siège Installez la housse du dossier du siège (2ème rangée, gauche). (2ème rangée, centre) (Garniture de tissu). Insérez la HOUUSE DE housse sous SIÈGE ARRIÈRE les guides de CENTRE retenue de la (2ème RANGÉE) HOUUSE DE tête.
Need help?
Do you have a question about the 0000-8K-R08 and is the answer not in the manual?
Questions and answers