Advertisement
Quick Links
GENUINE SIDE UNDER SPOILER
INSTALLATION INSTRUCTIONS
Thank you for purchasing a genuine Mazda accessory.
Before removal and installation, be sure to thoroughly read these instructions.
Please read the contents of this booklet in order to properly install and use the side
under spoiler. Your safety depends on it.
Keep these instructions with your vehicle records for future reference.
• There are several
safety when installing or removing the side under spoiler. Always read and follow them
in order to prevent injuries, accidents, and possible damage to the vehicle.
WARNING: Indicates a situation in which serious injury or death could result if
the warning is ignored.
CAUTION: Indicates a situation in which bodily injury or damage to the vehicle
could result if the caution is ignored.
• Do not modify the side under spoiler.
• Do not install the side under spoiler in any way other than described in the following
instructions.
• If in any doubt, please ask your Mazda dealer to install the accessory in order to
prevent errors in installation.
• If you have any questions about the use of the accessory, ask your Mazda dealer for
proper advice before using it.
• Mazda and its suppliers are not responsible for injuries, accidents, and damage to
persons and property that arise from the failure of the dealer or installer to follow these
instructions.
• To ensure safety and reliability of the work, installation, removal and disposal work
carried out by an Authorized Mazda Dealership is recommended
• Be careful not to lose removed parts, and be sure that they are kept free from
scratches, grease or other dirt.
PART NAME:
PART NUMBER:
VEHICLE:
Note
To the dealer
• Please turn over these instructions to the customer after installation.
To the customer
• Keep these instructions after installation. The instructions may be necessary
for installing other optional parts or removal of this accessory.
• Should the vehicle or this accessory be resold, always leave these instructions
with it for the next owner.
WARNING
WARNING and
CAUTION sections in this booklet concerning
SIDE UNDER SPOILER
CC29 V4 910F
Mazda 5
1
CC29 V0 003
Advertisement
Related Manuals for Mazda GENUINE SIDE UNDER SPOILER
Summary of Contents for Mazda GENUINE SIDE UNDER SPOILER
-
Page 1: Installation Instructions
• Do not install the side under spoiler in any way other than described in the following instructions. • If in any doubt, please ask your Mazda dealer to install the accessory in order to prevent errors in installation. • If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before using it. -
Page 2: Required Tools
1. PARTS NOTE • Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches, or damage. Part Name Part Name Part Name Side under spoiler Clip (small) Clip (large) (RH:C236 51P40A) （... -
Page 3: Before Installation
3. BEFORE INSTALLATION CAUTION Be sure to cover the Use the most appropriate When installing parts with Place the removed parts vehicle body with (size, use) tool for each task double-sided adhesive and kit accessories on a protectors or mats to perform work tape, carefully clean the... - Page 4 5. SIDE UNDER SPOILER INSTALLATION NOTE 12 Clips (small) • The figure shows the right side, however, perform the same procedure for the left side. Clip Removal 1. Detach the 12 clips (small) and 3 clips (large) installed to the side under spoiler.
- Page 5 5. Securely align the lower surface of the side under spoiler to the Vehicle front body, and press firmly so that there is absolutely no gap on side surface of the side under spoiler. (Refer to the cross-section view) 6. Temporarily fix the side under spoiler with tape. CAUTION Tape •...
- Page 6 12. With the drill bit pointed perpendicular to the body, drill 3 mm holes Cross-section view in the drill mark positions (12 locations). Hole for clip (small) 13. Expand the 3 mm holes (12 locations) to 10 mm using the drill. CAUTION •...
- Page 7 3. Align the side under spoiler clips with the installation holes, inserting Clip (small) the 12 clips (small) on the upper side first, then the 3 clips (small) on the lower side. Clip (large) CAUTION • Push the clips in slowly. If the clips are pushed in with Vehicle front excessive force, they will deform and it may become difficult to insert them.
- Page 8 INSTALLATION SIDE UNDER Mazda 5 INSPECTION SPOILER SHEET CC29 V4 910F Inspection items after installation • Inspect the installed/reinstalled parts for the following items: Check Item Part Scratches/Dirt/ Tightening/ Clearance/Fit Rust proofing Remaining tape engagement Side under spoiler Front fender,side...
- Page 9 • Do not install the side under spoiler in any way other than described in the following instructions. • If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before using it.
-
Page 10: Installing Procedure
REQUIRED PARTS (Check the following parts prior to installation) CAUTION • Check the chart shown below and make sure that no parts are missing. • Make sure all the component parts are free from dirt, scratches, or damages. Side under spoiler (RH, LH) (Painted product) Quantity 1each Clip (Small) - Page 11 GENUINE SIDE UNDER SPOILER IMPORTANT POINTS IN PAINTING PART NAME: SIDE UNDER SPOILER CC29 V4 910F PART NUMBER: VEHICLE: Mazda5 PAINT AREAS SURFACE TREATMENT (a) Paint same as body color Material: PP (b) No masking required <SEC. A-A> <SEC. B-B> <SEC.