Mazda KA0G V1 370 Installation And User Instruction Manual
Mazda KA0G V1 370 Installation And User Instruction Manual

Mazda KA0G V1 370 Installation And User Instruction Manual

Cx-5 genuine illuminated scuff plate

Advertisement

GENUINE ILLUMINATED SCUFF PLATE
INSTALLATION AND USER'S INSTRUCTIONS
Thank you for purchasing a Genuine Mazda Accessory.
Before removal and installation, Please thoroughly read these instructions.
For your safety, please read the contents of this booklet to properly install and use the illuminated scuff
plate.
Keep these instructions with your vehicle records for future reference.
 There are several
installing or removing the illuminated scuff plate. Always read and follow the instructions in order to prevent
order to prevent injuries, accidents, and possible damage to the vehicle.
WARNING: Indicates a situation in which serious injury or death could result if the warning
is ignored.
CAUTION:
Indicates a situation in which bodily injury or damage to the vehicle could result
if the caution is ignored.
For areas indicating the tightening torque in this instruction manual, tighten to the specified torque by using
a torque wrench. For areas in which the tightening torque is indicated inside parentheses ( ), the tightening
torque is indicated as a reference value, however tightening using a torque wrench is not necessary
 Do not modify the illuminated scuff plate.
 Do not install the illuminated scuff plate in any way other than described in the following instructions.
 If in doubt, please contact your Mazda dealer to install the accessory in order to prevent errors in
installation.
 If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before
using it.
 Mazda and its suppliers are not responsible for injuries, accidents, and damage to persons and property
that arise from the failure of the dealer or installer to follow these instructions.
 To ensure safety and reliability of the work, installation, removal and disposal work must be carried out by
an Authorized Mazda Dealership.
 Be careful not to lose removed parts, and be sure that they are kept free of dirt, scratches, or damage.
PART NAME:
PART NUMBER:
VEHICLE:
NOTE
To the dealer
 Please turn over these instructions to the customer after installation.
To the customer
 Keep these instructions after installation. The instructions may be necessary for
installing other optional parts or removal of this accessory.
 Should the vehicle or this accessory be resold, Always transfer these
instructions to the next owner.
WARNING
WARNING and
CAUTION sections in this booklet concerning safety when
ILLUMINATED SCUFF PLATE
KA0G V1 370
MAZDA CX-5
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KA0G V1 370 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mazda KA0G V1 370

  • Page 1  If in doubt, please contact your Mazda dealer to install the accessory in order to prevent errors in installation.  If you have any questions about the use of the accessory, ask your Mazda dealer for proper advice before using it.
  • Page 2: Installation View

    1. INSTALLATION VIEW 2. PARTS  Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches, or damage. Part Part name Part Part name Scuff plate Magnet set 2 sets (Identical for LH/RH) (Magnet/cover) Installation manual Template...
  • Page 3 4. DOUBLE-SIDED TAPE ATTACHMENT * "Attachment surface" refers to the doors and/or bumper, and "part" refers to supplementary parts. 1. Avoid working in ambient 2. Attach evenly. 3. Clean the attachment surface. temperatures of less than 15 °C. stickiness adhesive In order to ensure that the adhesive If there is any dirt, grease or other depends on the softness of the resin,...
  • Page 4 5. GENUINE ILLUMINATED SCUFF PLATE INSTALLATION  Follow the same procedure when installing to the opposite side of the vehicle. Scuff plate installation 1. Open the front door. 2. Clean the attachment areas for the scuff plate using a cloth or similar which has been moistened with IPA (isopropyl alcohol) or white gas to remove any oil and dirt, and then dry the area completely.
  • Page 5: Magnet Installation

     Follow the same procedure when installing to the opposite side of the vehicle. Magnet installation 1. Place the magnet onto the printed mark on the protective film (clear) which is attached to the scuff plate. 2. Close the door with a slightly firm push. 3.
  • Page 6: Cautions On Handling

    6. CAUTIONS ON HANDLING Be sure to observe the following when using and handling (cleaning) the illuminated scuff plates.  Check that the illumination turns on when the door is opened, and that it automatically switches off after approximately 30 seconds. Cautions on handling ...
  • Page 7 6. Install the scuff plate so that it fits into the locking plates which are attached to the side frame of the vehicle. Check that the scuff plate clicks into place when fitting it to the vehicle.

Table of Contents