Midea E60MEW2A09 Instruction Manual page 6

Hook the hood body

Hook the hood body to the bracket 20.

Level the hood body itself.
Remove the filter from the inside of the hood body, fix the screws 10 to Wall Plugs 11 at

the points (3).
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer

flange 3 on the hood body outlet.

Fix the pipe 4 in position using sufficient pipe clamps (not supplied).

Remove possible charcoal filters.
Right Wrong
6