Advertisement
Remove the grease filter and carefully remove the 2 screws from the front plate (a cross
headed screwdriver will be needed to remove the screws).
Disconnect the terminal of LED light.
Press LED light on the back of the front plate, take the LED light out.
Replace the lamp(commercially available LED lamp (max.1.5w).
Round/ Diameter
: 70mm
Reinstall LED light module
Press LED light on the front of front plate, install the LED light on the front plate.
Connect the terminal of LED light and light leads.
Carefully fasten the 2 screws on the front plate ,reinstall the grease filter.
Max Power
Voltage
1.5W
DC 12 V
Picture
10
Lamp Cap
ILCOS D code
——
DSR-1.5-S-70
Advertisement
