Trouble Shooting And Specification - CareCo Daytona XLR Usage And Maintenance Instructions

Table of Contents

Advertisement

Daytona XLR Mobility Scooter - MS03038
20

7. Trouble shooting and specification

Symptom
The scooter will not switch on:
The scooter switches on, but the scooter will
not move:
The scooter appears slow:
The seat turns when in operation:
The handlebar appears loose:
Horn sounds involuntarily:
Fault Code Diagnostics
The LED lights will 'blink' if there is a problem with your Daytona scooter. The list below will assist you in
identifying any possible malfunction.
www.careco.co.uk
Remedy
Try recharging the batteries.
Check the fuse and circuit breaker in the scooter.
Ensure there is enough power in the batteries; if not, recharge.
Ensure the freewheel lever is engaged in the 'DRIVE' position.
Check the battery power level and recharge.
Check the speed dial is not set to slow.
Slowly rotate the seat until it drops into place and is secure.
Tighten the height adjustment handle to secure the handlebar.
Ensure that the wigwag paddle is released.
Switch the scooter off and on.
Recharge the batteries.
If problem persists contact CareCo.
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms03038

Table of Contents