Trouble Shooting And Specification - CareCo Titan MS03039 Usage And Maintenance Instructions

Table of Contents

Advertisement

Titan Mobility Scooter - MS03039

7. Trouble shooting and Specification

Symptom
The scooter will not switch on:
The scooter switches on, but the scooter will not move:
The scooter appears slow:
The seat turns when in operation:
The handlebar appears loose:
Horn sounds involuntarily:
The LED lights will 'blink' if there is a problem with your Titan scooter. The list below will assist you in identifying any
possible malfunction.
www.careco.co.uk
Remedy
Try recharging the batteries.
Check the fuse and circuit breaker in the scooter.
Ensure there is enough power in the batteries;
if not, recharge.
Ensure the freewheel lever is engaged in the
'DRIVE' position.
Check the battery power level and recharge.
Check the speed dial is not set to slow.
Slowly rotate the seat until it drops into place
and is secure.
Tighten the height adjustment handle to secure
the handlebar.
Ensure that the wigwag paddle is released.
Switch the scooter off and on.
Recharge the batteries.
If problem persists contact CareCo.
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
19

Advertisement

Table of Contents
loading

Table of Contents