Table of Contents
Advertisement
PROGRAMMING
To View the Flash Number:
.
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
four, (4), times to view the Flash Number. "FLASH
NUMBER X...X" is displayed. (Flash number varies by grill).
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
To View the Software Number:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
five, (5), times to view the Software Number.
"SOFTWARE NUMBER X...X" is displayed. (number varies
by grill).
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
To View the Download Number:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
six, (6), times to view the Download Number.
"DOWNLOAD NUMBER X...X" is displayed. (Download
Part # 4517125 Rev. 3 (18 May 16)
continued
number varies by grill).
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
System Setup
To Change temperature Units, (°F or °C):
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
two, (2) times. "PROGRAMMING MODE SYSTEM
SETUP" is displayed.
5. Press
to enter system setup. "TEMP DISPLAY
FAHRENHEIT (or CELSIUS)" is displayed.
6. Press
to change the temperature units to either
Fahrenheit or Celsius.
7. Press
to save the changes.
8. Press
to return to "PROGRAMMING MODE SYSTEM
SETUP"
9. Press
again to exit.
To Change Gap Setting Display Units:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
two, (2) times. "PROGRAMMING MODE SYSTEM
SETUP" is displayed.
5. Press
two, (2), times. "GAP SETTING DISPLAY INCHES
(or MILLIMETERS)" is displayed.
6. Press
to change the Gap Setting Display units to either
Inches or Millimeters.
7. Press
to save the changes.
8. Press
to return to "PROGRAMMING MODE SYSTEM
SETUP"
9. Press
again to exit.
Page 23
Advertisement
Table of Contents
