Table of Contents
Advertisement
OPERATION
continued
Simplifi ed Cook Cycle Instructions:
1. Press button to turn on mainpower to grill.
2. Press
to turn zone power on.
3. Load product on grill surface and select the
corresponding product key.
4. Press both green and black buttons to lower clam and
begin cooking product.
Part # 4517125 Rev. 3 (18 May 16)
5. Press green button to cancel any time during cook cycle.
To Cook in Two-Sided Mode:
1. To start a cook cycle select a product recipe by using the
product keys (1 through 9) or by using the UP/DOWN
keys
or
to select a product recipe.
The display alternately blinks the recipe and the word
SELECTED 2 times then the recipe displays continuously.
2. The controller regulates the platen and grill temperatures
to the set temperatures of the product selected and
reads "TOO COOL" or "TOO HOT" with "MENU ITEM", until
the grill attains the set temperature range for the item.
NOTE: If the display reads either "TOO COOL" or "TOO HOT"
the upper platen will not lower and initiate a cooking
sequence.
3
After loading the product onto the grill, press the green
CANCEL/RAISE PLATEN BUTTON and BLACK button
simultaneously. A cook cycle starts and the upper platen
lowers if the product selected is clamshell recipe.
4 To cancel a cook cycle at anytime press the green
CANCEL/RAISE PLATEN BUTTON and the upper platen
will rise if the product recipe selected is clamshell recipe.
5. During a cook cycle, the display shows the product recipe
name in the fi rst line and the remaining cook time count
down in the second line.
6 When the cook timer reaches one, (1), second remaining
a pre-time-out alarm sounds alerting the operator.
7
When the cooking time has been completed the platen
raises automatically. On the controller the "PRODUCT
NAME" and the word "REMOVE" will be displayed and an
audible alert will sound.
8. Pressing the green CANCEL/RAISE PLATEN BUTTON stops
the audible alert and the unit will revert back to IDLE
mode.
Page 11
Advertisement
Table of Contents
