Jeep GLADIATOR 2022 Owner's Manual page 353

Table of Contents

Advertisement

2. Pull the carpet out from the front to the rear.
Front Carpet Pulled Away
3. Remove the grommets under the front seat. First for
the rear carpet and then the front carpet.
Front And Rear Carpet Split
4. Under the back of the front seat, open the carpet
split and then pull out the rear edge and slide the
carpet to the front (do not remove the harness).
Rear Underside Of Front Seat
1 — Harness
2 — Carpet Split
5. Finally open the carpet split around seat bracket
and then remove the last two grommets.
6. When reinstalling carpet, perform these steps in
reverse order, making sure that the carpet is tucked
under the scuffs, B-pillar, and console, and then
refasten the grommets.
SERVICING AND MAINTENANCE
Rear Carpet
1. Remove the grommets under the front seat (one left
and one right).
Carpet Split
1 — Grommet
2. Then pull the carpet out, to the rear and open the
carpet split around the front seat brackets.
3. Remove the rear Under Seat storage bin
(if equipped), by removing the four bolts that hold it
to the floor.
4. Remove the fastener bin from the rear floor, it is
held in by clips.
5. Remove the jack and tools by turning the wing bolt
counterclockwise, remove the wing bolt and then lift
the assembly out from under the seat.
351
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents