Yellow Warning Lights - Jeep GLADIATOR 2022 Owner's Manual

Table of Contents

Advertisement

114
GETTING TO KNOW YOUR INSTRUMENT PANEL
Oil Pressure Warning Light
This warning light will illuminate, and a
chime will sound, to indicate low engine oil
pressure. If the light and chime turn on while
driving, safely stop the vehicle and turn off
the engine as soon as possible. After the vehicle is
safely stopped, restart the engine and monitor the Oil
Pressure Warning Light. If the Oil Pressure Warning
Light is still illuminated, turn the engine OFF and con-
tact an authorized dealer for further assistance. Do not
operate the vehicle until the cause is corrected. If the
light is no longer illuminated, the engine can be oper-
ated but it is recommended to take the vehicle to an
authorized dealer as soon as possible.
Do not operate the vehicle until the cause is corrected.
This light does not indicate how much oil is in the
engine. The engine oil level must be checked under the
hood.
Oil Temperature Warning Light
This warning light will illuminate to indicate
the engine oil temperature is high. If the light
turns on while driving, stop the vehicle and
shut off the engine as soon as possible. Wait
for oil temperature to return to normal levels.
Seat Belt Reminder Warning Light
This warning light indicates when the driver
or passenger seat belt is unbuckled. When
the ignition is first placed in the ON/RUN or
ACC/ON/RUN position and if the driver's
seat belt is unbuckled, a chime will sound and the light
will turn on. When driving, if the driver or front passen-
ger seat belt remains unbuckled, the Seat Belt
Reminder Light will flash or remain on continuously and
a chime will sound
page 254.
Transmission Temperature Warning
Light — If Equipped
This warning light will illuminate to warn of a
high transmission fluid temperature. This
may occur with strenuous usage such as
trailer towing. If this light turns on, stop the
vehicle and run the engine at idle or slightly faster, with
the transmission in PARK (P) or NEUTRAL (N), until the
light turns off. Once the light turns off, you may con-
tinue to drive normally. If Manual transmission
equipped, this warning will illuminate to warn of high
clutch temperature. This may occur with driver misuse
of clutch pedal or resting foot on the clutch pedal or
partially engaging the clutch for longer duration. If the
light turns on, it will be with an additional CLUTCH HOT
message. Stop the vehicle safely and run the engine at
idle with transmission gear in NEUTRAL (N) until the
light turns off. Once the light turns off, follow the mes-
sage displayed in the instrument cluster.
WARNING!
If you continue operating the vehicle when the Trans-
mission Temperature Warning Light is illuminated you
could cause the fluid to boil over, come in contact
with hot engine or exhaust components and cause a
fire. If you continue to operate the vehicle when the
CLUTCH HOT message is displayed or Transmission
Temperature Warning Light is illuminated, you could
cause the clutch to overheat and cause a fire.
CAUTION!
Continuous driving with the Transmission Tempera-
ture Warning Light illuminated will eventually cause
severe transmission damage or transmission failure.
If you continue to operate the vehicle when the
CLUTCH HOT message is displayed or Transmission
Temperature Warning Light is illuminated, you could
cause the clutch to overheat and cause severe clutch
damage, transmission damage or failure.
Vehicle Security Warning Light —
If Equipped
This light will flash at a fast rate for approxi-
mately 15 seconds when the vehicle security
system is arming, and then will flash slowly
until the vehicle is disarmed.

YELLOW WARNING LIGHTS

Anti-Lock Brake System (ABS) Warning
Light
This warning light monitors the ABS. The
light will turn on when the ignition is placed
in the ON/RUN or ACC/ON/RUN position and
may stay on for as long as four seconds.
If the ABS light remains on or turns on while driving,
then the Anti-Lock portion of the brake system is not
functioning and service is required as soon as possible.
However, the conventional brake system will continue to
operate normally, assuming the Brake Warning Light is
not also on.
If the ABS light does not turn on when the ignition is
placed in the ON/RUN or ACC/ON/RUN position, have
the brake system inspected by an authorized dealer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents