Jeep GLADIATOR 2022 Owner's Manual page 215

vehicle. Only one mobile phone and/or one
Bluetooth® audio device can be connected to the
Uconnect system at a time. If "No" is selected, sim-
ply select "Uconnect" from the mobile phone/audio
device Bluetooth® screen, and the Uconnect system
will reconnect to the Bluetooth® device.
NOTE:
For phones which are not made a favorite, the
phone priority is determined by the order in which it
was paired. The most recent phone paired will have
the higher priority.
NOTE:
During the pairing procedure, you may receive a pop-up
on your mobile phone for the Uconnect system to
access your "messages" and "contacts". Selecting "Ok"
or "Allow" will sync your contacts with the Uconnect
system.
You can also use the following VR command to bring up
the Paired Phone screen from any screen on the radio:
•
"Show Paired Phones"
NOTE:
Software updates on your phone or the Uconnect sys-
tem may interfere with the Bluetooth® connection. If
this happens, simply repeat the pairing process. How-
ever, first make sure to delete the device from the list of
phones on your Uconnect system. Next, be sure to
remove Uconnect from the list of devices in your
phone's Bluetooth® settings.
PAIR A BLUETOOTH® STREAMING AUDIO
DEVICE
For information on how to pair a Bluetooth® streaming
audio device with the Uconnect 3 With 5-inch Display
radio page 212.
1. Press the Media button on the touchscreen to
begin.
2. Change the source to "Bluetooth®".
3. Press the Bluetooth® button on the touchscreen to
display the Paired Audio Devices screen.
4. Press the Add Device button on the touchscreen.
NOTE:
If there is no device currently connected with the
system, a pop-up will appear.
5. Search for available devices on your
Bluetooth®-enabled audio device. When prompted
on the device, confirm the PIN shown on the
Uconnect screen.
6. Uconnect Phone will display an in-process screen
while the system is connecting.
7. When the pairing process has successfully com-
pleted, the system will prompt you to choose
whether or not this is your favorite device. Selecting
"Yes" will make this device the highest priority. This
device will take precedence over other paired
devices within range.
NOTE:
For devices which are not made a favorite, the device
priority is determined by the order in which it was
paired. The most recent device paired will have the
higher priority.
MULTIMEDIA
You can also use a following VR command to bring up a
list of paired audio devices:
•
"Show Paired Phones"
CONNECTING TO A PARTICULAR MOBILE
PHONE OR AUDIO DEVICE AFTER PAIRING
Uconnect Phone will automatically connect to the high-
est priority paired phone and/or Audio Device within
range. If you need to choose a particular phone or
audio device follow these steps:
1. Press the Settings button on the touchscreen.
2. Press the Paired Phones or Audio Sources button.
3. Press to select the particular phone or the particular
audio device. A pop-up menu will appear; press
"Connect Phone".
4. Press the X to exit out of the Settings screen.
DISCONNECTING OR DELETING A PHONE OR
AUDIO DEVICE
Uconnect 3 With 5-inch Display
213
5