SIARETRON 1000 – 1100 - 3000
Service Manual
4.4
POWER BOARD
1)
Connect the power supplies to board:
the secondary of transformer (12Vac) in CN7 connector;
•
a rechargeable battery (12 Vdc, 3.2 Ah) in CN11 connector, respecting the polarity
•
serigraphically indicated;
the exit of power supply stabilized at 12V in the CN10 connector through the two ways switch,
•
as indicated in the following drawing:
from F020_03
Connect the testing equipment ATS.098 as indicated in the following drawing:
from F020_03
Supply the main of transformer; verify:
the commutation of K2 relay (point A of mounting plan);
•
that the rechargeable battery electric power increases (position the multimeter on battery poles).
•
SIARETRON_SE3_en
28 / (72 )
( rev.3) 30.06.2004